Adding Snmp Group Profiles - Cisco Linksys SFE1000P Reference Manual

• Operation — Defines the group access rights. The possible field values are:
– Read — The management access is restricted to read-only, and changes cannot be
made to the assigned SNMP view.
– Write — The management access is read-write and changes can be made to the
assigned SNMP view.
– Notify — Sends traps for the assigned SNMP view.

Adding SNMP Group Profiles

The Add SNMP Group Profile Page allows network managers to define new SNMP Group profiles.
The Add SNMP Group Profile Page contains the following fields:
• Group Name — Displays the user-defined group to which access control rules are applied.
The field range is up to 30 characters.
• Security Model — Defines the SNMP version attached to the group. The possible field values
are:
– SNMPv1 — SNMPv1 is defined for the group.
– SNMPv2 — SNMPv2 is defined for the group.
– SNMPv3 — SNMPv3 is defined for the group.
• Security Level — Defines the security level attached to the group. Security levels apply to
SNMPv3 only.
– No Authentication — Neither the Authentication nor the Privacy security levels are
assigned to the group.
– Authentication — Authenticates SNMP messages, and ensures the SNMP messages
origin is authenticated.
– Privacy — Encrypts SNMP message.
Chapter 12: Configuring SNMP
Defining SNMP Users
SFE1000P Gigabit Ethernet Switch Administration Guide
Add SNMP Group Profile Page
Chapter
12
142