Modify History Control Settings
The Edit RMON History Page contains the following fields:
•
History Entry No. — Displays the entry number for the History Control Table page.
•
Source Interface — Displays the interface (port or LAG) from which the history samples are
taken. The possible field values are:
–
Port — Specifies the port from which the RMON information is taken.
–
LAG — Specifies the LAG from which the RMON information is taken.
•
Owner — Displays the RMON station or user that requested the RMON information. The
field range is 0-20 characters.
•
Max No. of Samples to Keep — Indicates the number of samples to save.
•
Sampling Interval — Indicates the time in seconds that samplings are taken from the ports.
The field range is 1-3600. The default is 1800 seconds (equal to 30 minutes).
Chapter 17: Viewing Statistics
Managing RMON Statistics
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit RMON History Page
Chapter
17
211