–
Enable — Ingress filtering is activated on the port.
–
Disable — Ingress filtering is not activated on the port.
Configuring GVRP Settings
GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN
membership information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to
automatically learn VLANs to bridge ports mapping, without having to individually configure each
bridge and register VLAN membership.
To define GVRP:
NOTE: The Global System LAG information displays the same field information as the ports, but
represent the LAG GVRP information.
The GVRP Settings Page contains the following fields:
•
GVRP Global Status — Indicates if GVRP is enabled on the device. The possible field values
are:
–
Enable — Enables GVRP on the device.
–
Disable — Disables GVRP on the device.
•
Copy from Entry Number — Specifies the row number from which GVRP parameters are
copied.
•
To Entry Number — Specifies the row to which the copied GVRP parameters are assigned.
•
Port — Displays the GVRP configurations for specified port number.
•
LAGs — Displays the GVRP configurations for LAGs.
Chapter 7: Configuring VLANs
Configuring GVRP Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
GVRP Settings Page
Chapter
7
90