Cisco Linksys SFE1000P Reference Manual page 221

8-port 10/100 ethernet switch with poe
Hide thumbs Also See for Linksys SFE1000P:
Table of Contents

Advertisement

Undersize Packets — Displays the number of undersized packets (less than 64 octets)
received on the interface since the page was last refreshed.
Oversize Packets — Displays the number of oversized packets (over 1518 octets) received
on the interface since the page was last refreshed.
Fragments — Displays the number of fragments (packets with less than 64 octets, excluding
framing bits, but including FCS octets) received on the interface since the page was last
refreshed.
Jabbers — Displays the total number of received packets that were longer than 1518 octets.
This number excludes frame bits, but includes FCS octets that had either a bad Frame Check
Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-
integral octet (Alignment Error) number. The field range to detect jabbers is between 20 ms
and 150 ms.
Collisions — Displays the number of collisions received on the interface since the page was
last refreshed.
Utilization — Displays the percentage of the interface utilized.
Chapter 17: Viewing Statistics
Managing RMON Statistics
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
17
213

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sfe1000p

Table of Contents