Adding QoS Aggregate Policer
The Add QoS Aggregate Policer Page contains the following fields.
•
Aggregate Policer Name — Specifies the Aggregate Policer Name.
•
Ingress Committed Information Rate (CIR) — Defines the CIR in bits per second.
•
Ingress Committed Burst Size (CBS) — Defines the CBS in bytes per second.
•
Exceed Action — Action assigned to incoming packets exceeding the CIR. Possible values
are:
–
Drop — Drops packets exceeding the defined CIR value.
–
Remark DSCP — Remarks packet's DSCP values exceeding the defined CIR value.
–
None — Forwards packets exceeding the defined CIR value.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Add QoS Aggregate Policer Page
Chapter
13
169