Adding Qos Class Maps - Cisco Linksys SFE1000P Reference Manual

Adding QoS Class Maps

The Add QoS Class Map Page contains the following fields.
• Class Map Name — Defines a new Class Map name.
• Preferred ACL — Indicates if packets are first matched to an IP based ACL or a MAC based
ACL. The possible field values are:
– IP Based ACLs — Matches packets to IP based ACLs first, then matches packets to MAC
based ACLs.
– MAC Based ACLs — Matches packets to MAC based ACLs first, then matches packets to
IP based ACLs.
• IP ACL — Matches packets to IP based ACLs first, then matches packets to MAC based ACLs.
• Match — Criteria used to match IP addresses and /or MAC addresses with an ACL's
address.The possible field values are:
– And — Both the MAC-based and the IP-based ACL must match a packet.
– Or — Either the MAC-based or the IP-based ACL must match a packet.
• MAC ACL — Matches packets to MAC based ACLs first, then matches packets to IP based
ACLs.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Add QoS Class Map Page
Chapter
13
167