Default Igmp Snooping Configuration Settings - Cisco ASR 9000 Series Configuration Manual

Default IGMP Snooping Configuration Settings

Default IGMP Snooping Configuration Settings
Table 6: IGMP Snooping Default Configuration Values
Scope
Bridge Domain
Port
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
12
Implementing Layer-2 Multicast with IGMP Snooping
Feature
IGMP snooping
internal querier
last-member-query-count
last-member-query-interval
minimum-version
querier query-interval
report-suppression
querier robustness-variable
router alert check
tcn query solicit
tcn flood
ttl-check
unsolicited-report-timer
immediate-leave
mrouter
router guard
static group
Default Value
Disabled on a bridge domain until
an enabling IGMP profile is
attached to the bridge domain.
None configured
2
1000 (milliseconds)
2 (supporting IGMPv2 and
IGMPv3)
60 (seconds)
Note This is a nonstandard
default value.
Enabled (enables report
suppression for IGMPv2 and
proxy-reporting for IGMPv3)
2
Enabled
Disabled
Enabled
Enabled
1000 (milliseconds)
Disabled
No static mrouters configured;
dynamic discovery occurs by
default.
Disabled
None configured