Chapter 2: Getting Started; Starting The Application - Cisco Linksys SFE1000P Reference Manual

Getting Started
This section provides an introduction to the user interface, and includes the following topics:
•

Starting the Application

• Understanding the Interface
• Using the Linksys Management Buttons
• Using Screen and Table Options
• Resetting the Device
• Logging Off The Device
Starting the Application
This section contains information for starting the Linksys User Interface.
NOTE: By default, the IP address of the device is assigned
dynamically. The IP address can be changed
Enter a user name and password. The default user name is "admin"
with a default password, and can be configured without entering a password. Passwords are both
case sensitive and alpha-numeric.

Chapter 2: Getting Started

Starting the Application
SFE1000P Gigabit Ethernet Switch Reference Guide
Enter Network Password Page
Chapter
The device is not configured
.
2
3