Modifying Vlan Membership - Cisco Linksys SFE1000P Reference Manual

– Exclude — Excludes the interface from the VLAN. However, the interface can be added
to the VLAN through GARP.
– Forbidden — Denies the interface VLAN membership, even if GARP indicates the port is
to be added.

Modifying VLAN Membership

The Edit VLAN Membership Page contains the following fields:
• VLAN ID — Displays the VLAN ID.
• VLAN Name — Displays the VLAN name.
• Interface — Displays the port or LAG attached to the VLAN.
• Interface Status — Displays the current interface's membership status in the VLAN. The
possible field values are:
– Untagged — Indicates the interface is an untagged VLAN member. Packets forwarded
by the interface are untagged.
– Tagged — Indicates the interface is a tagged member of a VLAN. All packets forwarded
by the interface are tagged. The packets contain VLAN information.
– Exclude — Excludes the interface from the VLAN. However, the interface can be added
to the VLAN through GARP.
– Forbidden — Denies the interface VLAN membership, even if GARP indicates the port is
to be added.
Chapter 7: Configuring VLANs
Defining VLAN Membership
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit VLAN Membership Page
Chapter
7
87