The TACACS+ Page contains the following fields:
•
Source IP Address — Displays the device source IP address used for the TACACS+ session
between the device and the TACACS+ server.
•
Key String — Defines the authentication and encryption key for TACACS+ server. The key
must match the encryption key used on the TACACS+ server.
•
Timeout for Reply — Displays the amount of time that passes before the connection between
the device and the TACACS+ server times out. The field range is 1-30 seconds.
The following parameters are configured for each TACACS+ server:
•
Host IP Address — Displays the TACACS+ Server IP address.
•
Priority — Displays the order in which the TACACS+ servers are used. The default is 0.
•
Source IP Address — Displays the device source IP address used for the TACACS+ session
between the device and the TACACS+ server.
•
Authentication Port — Displays the port number through which the TACACS+ session
occurs. The default is port 49.
•
Timeout for Reply — Displays the amount of time in seconds that passes before the
connection between the device and the TACACS+ times out. The field range is 1-1000
seconds.
•
Single Connection — Maintains a single open connection between the device and the
TACACS+ server when selected.
•
Status — Displays the connection status between the device and the TACACS+ server. The
possible field values are:
Chapter 5: Configuring Device Security
Defining TACACS+
SFE1000P Gigabit Ethernet Switch Reference Guide
TACACS+ Page
Chapter
5
23