Table of Contents
Advertisement
–
SNMP V2 — Indicates SNMP Version 2 traps are sent.
The SNMPv3 Notification Recipient area contains the following fields:
•
SNMPv3 — Enables SNMPv3 as the Notification version. If SNMPv3is enabled, the User
Name and Security Level fields are enabled for configuration:
•
User Name — Defines the user to whom SNMP notifications are sent.
•
Security Level — (SNMP v3) Defines the means by which the packet is authenticated. The
possible field values are:
–
No Authentication — Indicates the packet is neither authenticated nor encrypted.
–
Authentication — Indicates the packet is authenticated.
–
Privacy — Indicates the packet is both authenticated and encrypted.
The UDP Port Notification Recipient area contains the following fields:
•
UDP Port — Displays the UDP port used to send notifications. The default is 162.
•
Filter Name — Indicates if the SNMP filter for which the SNMP Notification filter is defined.
•
Timeout — Indicates the amount of time (seconds) the device waits before re-sending
informs. The default is 15 seconds.
•
Retries — Indicates the amount of times the device re-sends an inform request. The default is
3 seconds.
Chapter 12: Configuring SNMP
Defining Trap Management
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
12
153
Hide quick links:
Advertisement
Table of Contents
