Add Snmp Group Membership - Cisco Linksys SFE1000P Reference Manual

Add SNMP Group Membership

The Add SNMP Group Membership Page provides information for assigning SNMP access control
privileges to SNMP groups.
The Add SNMP Group Membership Page contains the following fields.
• User Name — Provides a user-defined local user list.
• Engine ID — Indicates either the local or remote SNMP entity to which the user is connected.
Changing or removing the local SNMP Engine ID deletes the SNMPv3 User Database.
– Local — Indicates that the user is connected to a local SNMP entity.
– Remote — Indicates that the user is connected to a remote SNMP entity. If the Engine ID
is defined, remote devices receive inform messages.
• Group Name — SNMP group, which can be chosen from the list, to which the SNMP user
belongs. SNMP groups are defined in the SNMP Group Profile Page.
• Authentication Method— Indicates the Authentication method used. The possible field
values are:
– MD5 Key — Users are authenticated using the HMAC-MD5 algorithm.
– SHA Key — Users are authenticated using the HMAC-SHA-96 authentication level.
– MD5 Password — The HMAC-MD5-96 password is used for authentication. The user
should enter a password.
– SHA Password — Users are authenticated using the HMAC-SHA-96 authentication
level. The user should enter a password.
– None — No user authentication is used.
Chapter 12: Configuring SNMP
Defining SNMP Users
SFE1000P Gigabit Ethernet Switch Administration Guide
Add SNMP Group Membership Page
Chapter
12
139