Edit Poe - Cisco Linksys SFE1000P Reference Manual

– 0.44 – 3.8 — Indicates that the port is assigned a power consumption level of .44 to 3.8
watts.
– 3.84 – 6.49 — Indicates that the port is assigned a power consumption level of 3.84 to
6.49 watts.
– 6.49 – 12.95 — Indicates that the port is assigned a power consumption level of 6.49 to
12.95 watts.

Edit PoE

Use the Edit PoE page to change settings for your devices.
The Edit PoE contains the following fields:
• Port — Indicates the specific interface for which PoE parameters are defined, and assigned
to the powered interface connected to the selected port.
• Enable PoE — Enables or disables PoE on the port. The possible values are:
– Enable — Enables PoE on the port. This is the default setting.
– Disable — Disables PoE on the port.
• Power Priority Level — Determines the port priority if the power supply is low. The port
power priority is used if the power supply is low. The field default is low. For example, if the
power supply is running at 99% usage, and port 1 is prioritized as high, but port 3 is
prioritized as low, port 1 is prioritized to receive power, and port 3 may be denied power.
The possible field values are:
– Low — Defines the PoE priority level as low. This is the default level.
Chapter 4: Managing Power-over-Ethernet Devices
PoE Settings
SFE1000P Gigabit Ethernet Switch Reference Guide
Edit PoE
Chapter
4
14