Modifying ARP Settings
The Edit ARP Page allows you to manually edit ARP addresses.
The Edit ARP Page contains the following fields:
•
Interface — Indicates the interface connected to the device.
•
IP Address — Indicates the station IP address, which is associated with the MAC address
filled in below.
•
MAC Address — Indicates the station MAC address, which is associated in the ARP table
with the IP address.
•
Status — Indicates the ARP Table entry status. Possible field values are:
–
Dynamic — Indicates the ARP entry was learned dynamically.
–
Static — Indicates the ARP entry is a static entry.
Chapter 8: Configuring IP Information
Configuring Layer 2 IP Addresses
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit ARP Page
Chapter
8
103