Defining Qos Basic Mode - Cisco Linksys SFE1000P Reference Manual

Defining QoS Basic Mode

The Basic Mode Page contains information for enabling Trust on the device. Packets entering a QoS
domain are classified at the edge of the QoS domain.
The Basic Mode Page contains the following fields:
• Trust Mode — Displays the trust mode. If a packet's CoS tag and DSCP tag, and TCP/UDP
mapping are mapped to different queues, the Trust Mode determines the queue to which the
packet is assigned. Possible values are:
– CoS — Sets trust mode to CoS on the device. The CoS mapping determines the packet
queue
– DSCP — Sets trust mode to DSCP on the device. The DSCP mapping determines the
packet queue.
• Always Rewrite DSCP — Rewrites the packet DSCP tag according to the QoS DSCP
Rewriting configuration. Always Rewrite DSCP can only be selected if the Trust Mode is set to
DSCP.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Basic Mode Page
Chapter
13
176