Table of Contents
Advertisement
Viewing Remote Logs
The Remote Log Servers Page contains information for viewing and configuring the Remote Log
Servers. New log servers and the minimum severity level of events sent to them may be added.
The Remote Log Servers Page contains the following fields:
•
Server — Specifies the server IP address to which logs can be sent.
•
UDP Port — Defines the UDP port to which the server logs are sent. The possible range is 1
to 65535. The default value is 514.
•
Facility — Defines a user-defined application from which system logs are sent to the remote
server. Only one facility can be assigned to a single server. If a second facility level is
assigned, the first facility is overridden. All applications defined for a device utilize the same
facility on a server. The field default is Local 7. The possible field values are Local 0 - Local
7.
•
Description — Provides a user-defined server description.
•
Minimum Severity — Indicates the minimum severity level for logs that are sent to the server.
For example, if Notice is selected, all logs from a Notice severity and higher are sent to the
remote server.
The following are the available log severity levels:
–
Emergency — The highest warning level. If the device is down or not functioning
properly, an emergency log message is saved to the specified logging location.
–
Alert — The second highest warning level. An alert log is saved, if there is a serious
device malfunction; for example, all device features are down.
Chapter 15: Managing System Logs
Viewing Remote Logs
SFE1000P Gigabit Ethernet Switch Administration Guide
Remote Log Servers Page
Chapter
15
187
Hide quick links:
Advertisement
Table of Contents
