Defining General Settings; Defining Cos - Cisco Linksys SFE1000P Reference Manual

The Quality of Service section contains the following section:
•

Defining General Settings

• Defining Advanced Mode
• Defining QoS Basic Mode
The section also contains the following pages:
• Configuring Policy Table
• Configuring Policy Table
Defining General Settings
The QoS General Settings section contains the following pages:
•

Defining CoS

• Defining Queue
• Mapping CoS to Queue
• Mapping DSCP to Queue
• Configuring Bandwidth
Defining CoS
The CoS Page contains fields for enabling or disabling CoS (Basic or Advanced mode). In addition,
the default CoS for each port or LAG is definable.
The CoS Page contains the following fields:
Chapter 13: Configuring Quality of Service
Defining General Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
CoS Page
Chapter
13
157