–
Up — The SNTP server is currently operating normally.
–
Down — Indicates that a SNTP server is currently not available. For example, the SNTP
server is currently not connected or is currently down.
•
Last Response — Indicates the last time a response was received from the SNTP server.
•
Offset — Indicates the Timestamp difference between the device local clock and the
acquired time from the SNTP server.
•
Delay — Indicates the amount of time it takes to reach the SNTP server.
Add SNTP Server
The Add SNTP Server Page provides parameters for adding an SNTP server.
The Add SNTP Server Page contains the following fields:
•
SNTP Server — The SNTP server's IP address.
•
Enable Poll Interval — Select whether or not the device polls the selected SNTP server for
system time information.
•
Encryption Key ID — Select if Key Identification is used to communicate between the SNTP
server and device. The range is 1 - 4294967295.
Chapter 16: Configuring System Time
SFE1000P Gigabit Ethernet Switch Administration Guide
Add SNTP Server Page
Chapter
16
196