Verifying And Monitoring Wccp Configuration Settings - Cisco ASR 1000 Series Configuration Manual

Configuring WCCP
Command or Action
Step 13
ip wccp redirect exclude in
Example:
Router(config-if)# ip wccp redirect
exclude in

Verifying and Monitoring WCCP Configuration Settings

SUMMARY STEPS
1. enable
2. show ip wccp [vrf vrf-name] [web-cache |service-number] [detail view]
3. show ip interface
4. more system:running-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 show ip wccp [vrf vrf-name]
[web-cache |service-number] [detail
view]
Example:
Device# show ip wccp 24 detail
Purpose
Configures an interface to exclude packets received on an interface
from being checked for redirection..
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays global information related to WCCP, including the protocol version
running, the number of content engines in the router service group, which content
engine group is allowed to connect to the router, and which access list is being
used.
• vrf vrf-name—(Optional) Virtual routing and forwarding (VRF) instance
associated with a service group.
• service-number—(Optional) Dynamic number of the web-cache service
group being controlled by the content engine. The range is from 0 to 99.
For web caches that use Cisco Content Engines, the reverse proxy service
is indicated by a value of 99.
• web-cache—(Optional) statistics for the web-cache service.
• detail—(Optional) other members of a particular service group or web
cache that have or have not been detected.
• view—(Optional) information about a router or all web caches.
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
Verifying and Monitoring WCCP Configuration Settings
75