Configuring LACP
Aggregate ports can be linked into link-aggregation port-groups. Each group is comprised of ports
with the same speed, set to full-duplex operations.
Aggregated Links can be manually setup or automatically established by enabling Link Aggregation
Control Protocol (LACP) on the relevant links. Aggregate ports can be linked into link-aggregation
port-groups. Each group is comprised of ports with the same speed.
The LACP Page contains fields for configuring LACP LAGs.
•
LACP System Priority — Indicates the global LACP priority value. The possible range is 1-
65535. The default value is 1.
•
Port — Defines the port number to which timeout and priority values are assigned.
•
Port Priority — Defines the LACP priority value for the port. The field range is 1-65535.
•
LACP Timeout — Administrative LACP timeout. The possible field values are:
–
Short — Defines a short timeout value.
–
Long — Defines a long timeout value. This is the default value.
Chapter 6: Configuring Device Interfaces
Configuring LACP
SFE1000P Gigabit Ethernet Switch Administration Guide
LACP Page
Chapter
6
81