Defining Authenticated Host - Cisco Linksys SFE1000P Reference Manual

• Action on Violation — Defines the action to be applied to packets arriving in single-host
mode, from a host whose MAC address is not the supplicant MAC address. The possible
field values are:
– Forward — Forwards the packet.
– Discard — Discards the packets. This is the default value.
– DiscardDisable — Discards the packets and shuts down the port. The ports remains shut
down until reactivated, or until the device is reset.
• Enable Traps — Indicates if traps are enabled for Multiple Hosts. The possible field values
are:
– Checked — Indicates that traps are enabled for Multiple hosts.
– Unchecked — Indicates that traps are disabled for Multiple hosts.
• Trap Frequency — Defines the time period by which traps are sent to the host. The Trap
Frequency (1-1000000) field can be defined only if multiple hosts are disabled. The default
is 10 seconds.

Defining Authenticated Host

The Authenticated Host Page contains a list of authenticated users.
The Authenticated Host Page contains the following fields:
• User Name — Lists the supplicants that were authenticated, and are permitted on each port.
• Port — Displays the port number.
• Session time — Displays the amount of time (in seconds) the supplicant was logged on the
port.
Chapter 5: Configuring Device Security
Defining 802.1x
SFE1000P Gigabit Ethernet Switch Reference Guide
Authenticated Host Page
Chapter
5
52