Define Snmp Groups - Cisco Linksys SFE1000P Reference Manual

• Privacy Key — Defines the Privacy Key (LSB). If only authentication is required, 20 bytes are
defined. If both privacy and authentication are required, 36 bytes are defined. Each byte in
hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a
period or colon. This field is available if the Authentication Method is a key.

Define SNMP Groups

The SNMP Groups Profile Page provides information for creating SNMP groups and assigning
SNMP access control privileges to SNMP groups. Groups allow network managers to assign access
rights to specific device features, or features aspects.
The SNMP Groups Profile Page contains the following fields:
• Group Name — Displays the user-defined group to which access control rules are applied.
• Security Model — Defines the SNMP version attached to the group. The possible field values
are:
– SNMPv1 — SNMPv1 is defined for the group.
– SNMPv2 — SNMPv2 is defined for the group.
– SNMPv3 — SNMPv3 is defined for the group.
• Security Level — Defines the security level attached to the group. Security levels apply to
SNMPv3 only. The possible field values are:
– No Authentication — Indicates that neither the Authentication nor the Privacy security
levels are assigned to the group.
– Authentication — Authenticates SNMP messages, and ensures the SNMP messages
origin is authenticated.
– Privacy — Encrypts SNMP message.
Chapter 12: Configuring SNMP
Defining SNMP Users
SFE1000P Gigabit Ethernet Switch Administration Guide
SNMP Groups Profile Page
Chapter
12
141