Modifying The Qos Policy Profile - Cisco Linksys SFE1000P Reference Manual

Modifying the QoS Policy Profile

The Edit QoS Policy Profile Page contains the following fields.
• Policy Name— Displays the user-defined policy name.
• Class Map — Displays the user-defined name of the class map.
• Action — Defines the action attached to the rule. The possible field values are:
– Trust CoS-DSCP — Enables CoS-DSCP Trust Mode for the class. This command is used to
distinguish the QoS trust behavior for given traffic. When a given type is trusted, the
QoS mechanism maps a packet to a queue using the received or default value and the
relevant map, as defined on the QoS Settings. By designating trust, it is possible to trust
only incoming traffic with certain DSCP values.
– Set DSCP — Defines the Trust configuration manually. In the New Value box, the
possible values are 0-63.
• Police — Enables Policer functionality.
• Type — Policer type for the policy. Possible values are:
– Aggregate — Configures the class to use a configured aggregate policer selected from
the drop-down menu. An aggregate policer is defined if the policer is shared with
multiple classes. Traffic from two different ports can be configured for policing purposes.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit QoS Policy Profile Page
Chapter
13
173