Chapter 5: Configuring Device Security; Passwords Management - Cisco Linksys SFE1000P Reference Manual

Configuring Device Security
The Security Suite contains the following sections:
•

Passwords Management

• Defining Authentication
• Defining Access Method
• Defining Traffic Control
• Defining 802.1x
• Defining Access Control
• Defining DoS Prevention
Passwords Management
This section contains information for defining passwords. Passwords are used to authenticate users
accessing the device.
NOTE: By default, a single user name is defined,
"admin", with no password. An additional user name/
password is configured for use in the system.
The User Authentication Page contains the following fields:

Chapter 5: Configuring Device Security

Passwords Management
SFE1000P Gigabit Ethernet Switch Reference Guide
User Authentication Page
Chapter
5
16