Add Profile Rule - Cisco Linksys SFE1000P Reference Manual

Add Profile Rule

The Add Profile Rule Page contains the following fields:
• Access Profile Name — Defines the access profile name. The access profile name can
contain up to 32 characters.
• Priority — Defines the rule priority. When the packet is matched to a rule, user groups are
either granted permission or denied device management access. The rule number is
essential to matching packets to rules, as packets are matched on a first-fit basis. The rule
priorities are assigned in the Profile Rules Page.
• Management Method — Defines the management method for which the rule is defined.
Users with this access profile can access the device using the management method selected.
The possible field values are:
– All — Assigns all management methods to the rule.
– Telnet — Assigns Telnet access to the rule. If selected, users accessing the device using
Telnet meeting access profile criteria are permitted or denied access to the device.
– SNMP — Assigns SNMP access to the rule. If selected, users accessing the device using
SNMP meeting access profile criteria are permitted or denied access to the device.
– HTTP — Assigns HTTP access to the rule. If selected, users accessing the device using
HTTP meeting access profile criteria are permitted or denied access to the device.
– Secure HTTP (SSL) — Assigns HTTPS access to the rule. If selected, users accessing the
device using HTTPS meeting access profile criteria are permitted or denied access to the
device.
– Secure Telnet (SSH) — Assigns SSH access to the rule. If selected, users accessing the
device using Telnet meeting access profile criteria are permitted or denied access to the
device.
Chapter 5: Configuring Device Security
Defining Access Method
SFE1000P Gigabit Ethernet Switch Reference Guide
Add Profile Rule Page
Chapter
5
35