Resetting Interface Statistics Counters - Cisco Linksys SFE1000P Reference Manual

– Port — Defines the specific port for which Ethernet statistics are displayed.
– LAG — Defines the specific LAG for which Ethernet statistics are displayed.
• Refresh Rate — Defines the amount of time that passes before the interface statistics are
refreshed. The possible field values are:
– 15 Sec — Indicates that the Ethernet statistics are refreshed every 15 seconds.
– 30 Sec — Indicates that the Ethernet statistics are refreshed every 30 seconds.
– 60 Sec — Indicates that the Ethernet statistics are refreshed every 60 seconds.
– No Refresh — Indicates that the Ethernet statistics are not refreshed.
The Receive Statistics area contains the following fields:
• Total Bytes (octets) — Displays the number of octets received on the interface since the page
was last refreshed. This number includes bad packets and FCS octets, but excludes framing
bits.
• Unicast Packets — Displays the number of good Unicast packets received on the interface
since the page was last refreshed.
• Multicast Packets — Displays the number of good Multicast packets received on the
interface since the page was last refreshed.
• Broadcast Packets — Displays the number of good broadcast packets received on the
interface since the page was last refreshed.
• Packets with Errors — Displays the number of packets with errors.
The Transmit Statistics area contains the following fields:
• Total Bytes (octets) — Displays the number of octets transmitted on the interface since the
page was last refreshed. This number includes bad packets and FCS octets, but excludes
framing bits.
• Unicast Packets — Displays the number of good Unicast packets transmitted on the interface
since the page was last refreshed.
• Multicast Packets — Displays the number of good Multicast packets transmitted on the
interface since the page was last refreshed.
• Broadcast Packets — Displays the number of good broadcast packets transmitted on the
interface since the page was last refreshed.

Resetting Interface Statistics Counters

To clear the statistics counters, click the Clear Counters button.
Chapter 17: Viewing Statistics
Viewing Ethernet Statistics
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
17
200