Table of Contents
Advertisement
Defining LAG Settings
Link Aggregated Groups optimize port usage by linking a group of ports together to form a single
aggregated group. Link aggregated groups multiply the bandwidth between the devices, increase
port flexibility, and provide link redundancy.
The LAG Settings Page contains fields for configuring parameters for configured LAGs. The device
supports up to eight ports per LAG, and eight LAGs per system.
The LAG Settings Page contains the following fields:
•
Copy from Entry Number — Copies the LAG settings from the specified port.
•
To Entry Number(s) — Assigns the copied LAG settings to the specified ports.
•
LAG — Displays the LAG ID number.
•
Description — Displays the user-defined port name.
•
Type — The port types that comprise the LAG.
•
Status — Indicates if the LAG is currently operating.
•
Speed — The configured speed at which the LAG is operating.
•
Auto Negotiation — The current Auto Negotiation setting. Auto Negotiation is a protocol
between two link partners that enables a port to advertise its transmission rate, duplex mode
and flow control abilities to its partner.
Chapter 6: Configuring Device Interfaces
Defining LAG Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
LAG Settings Page
Chapter
6
78
Hide quick links:
Advertisement
Table of Contents
