Adding Snmp Communities - Cisco Linksys SFE1000P Reference Manual

• Group Name — Displays advanced SNMP communities group name.

Adding SNMP Communities

The Add SNMP Community Page allows network managers to define and configure new SNMP
communities.
The Add SNMP Community Page contains the following fields:
• SNMP Management Station — Defines the management station IP address for which the
SNMP community is defined. There are two definition options:
– Define the management station IP address.
– All, which includes all management station IP addresses.
• Community String — Defines the password used to authenticate the management station to
the device.
Configure either the Basic Mode or the Advanced Mode.
Basic — Enables SNMP Basic mode for a selected community and contains the following fields:
• Access Mode — Defines the access rights of the community. The possible field values are:
– Read Only — Management access is restricted to read-only, and changes cannot be
made to the community.
– Read Write — Management access is read-write and changes can be made to the
device configuration, but not to the community.
– SNMP Admin — User has access to all device configuration options, as well as
permissions to modify the community.
• View Name — Contains a list of user-defined SNMP views.
Advanced — Enables SNMP Advanced mode for a selected community and contains the
following field:
Chapter 12: Configuring SNMP
Defining SNMP Communities
SFE1000P Gigabit Ethernet Switch Administration Guide
Add SNMP Community Page
Chapter
12
145