Defining Policy Binding - Cisco Linksys SFE1000P Reference Manual

An aggregate policer can be applied to multiple classes in the same policy map, but
cannot be used across different policy maps.
– Single — Configures the class to use manually configured information rates and exceed
actions.
• Aggregate Policer — Specifies the Aggregate Policer Name
• Ingress Committed Information Rate (CIR) — Defines the CIR in Kbps. This field is only
relevant when the Police value is Single.
• Ingress Committed Burst Size (CBS) — Defines the CBS in bytes. This field is only relevant
when the Police value is Single.
• Exceed Action — Action assigned to incoming packets exceeding the CIR. This field is only
relevant when the Police value is Single. Possible values are:
– Drop — Drops packets exceeding the defined CIR value.
– Remark DSCP —Remarks packet's DSCP values exceeding the defined CIR value.
– None —Forwards packets exceeding the defined CIR value.

Defining Policy Binding

In the Policy Binding Page, QoS policies are associated with specific interfaces.
The Policy Binding Page contains the following fields:
• Interface — Displays the interface to which the entry refers.
• Policy Name — Displays a Policy name associated with the interface.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Policy Binding Page
Chapter
13
174