–
Connected — There is currently a connection between the device and the TACACS+
server.
–
Not Connected — There is not currently a connection between the device and the
TACACS+ server.
Add TACACS+ Server
The Add TACACS+ Server Page contains the following fields:
•
Host IP Address — Displays the TACACS+ Server IP address.
•
Priority — Displays the order in which the TACACS+ servers are used. The default is 0.
•
Source IP Address — Defines the device source IP address used for the TACACS+ session
between the device and the TACACS+ server.
•
Key String — Defines the authentication and encryption key for TACACS+ server. The key
must match the encryption key used on the TACACS+ server.
•
Authentication Port — Displays the port number through which the TACACS+ session
occurs. The default is port 49.
•
Timeout for Reply — Defines the amount of time that passes before the connection between
the device and the TACACS+ server times out. The field range is 1-30 seconds.
•
Single Connection — Maintains a single open connection between the device and the
TACACS+ server when selected.
•
Use Default — Uses the default value for the parameter.
Chapter 5: Configuring Device Security
Defining TACACS+
SFE1000P Gigabit Ethernet Switch Reference Guide
Add TACACS+ Server Page
Chapter
5
24