Modifying Snmp Community Settings - Cisco Linksys SFE1000P Reference Manual

• Group Name — Defines advanced SNMP communities group names.

Modifying SNMP Community Settings

The Edit SNMP Community Page allows network managers to edit SNMP communities.
The Edit SNMP Community Page contains the following fields:
• SNMP Management — Defines the management station IP address for which the SNMP
community is defined.
• Community String — Defines the password used to authenticate the management station to
the device.
Configure either the Basic Mode or the Advanced Mode.
Basic — Enables SNMP Basic mode for a selected community and contains the following fields:
• Access Mode — Defines the access rights of the community. The possible field values are:
– Read Only — Management access is restricted to read-only, and changes cannot be
made to the community.
– Read Write — Management access is read-write and changes can be made to the
device configuration, but not to the community.
– SNMP Admin — User has access to all device configuration options, as well as
permissions to modify the community.
• View Name — Contains a list of user-defined SNMP views.
Advanced — Enables SNMP Advanced mode for a selected community and contains the
following fields:
• Group Name — Defines advanced SNMP communities group names.
Chapter 12: Configuring SNMP
Defining SNMP Communities
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit SNMP Community Page
Chapter
12
146