Chapter 8: Telephones and adjunct systems
This section provides information on connecting telephones and other adjunct systems. To
install and wire telephones and connect their power supplies, follow the instructions in
Installation and wiring of telephones and power supplies
●
Complete the telephone installation process
●
In addition, you may need to install one or more adjunct systems or devices. Follow the
instructions in:
IA 770 INTUITY AUDIX messaging application
●
INTUITY AUDIX LX messaging system
●
ASAI co-resident DEFINITY LAN gateway (DLG)
●
Call center
●
Avaya Integrated Management
●
Uninterruptible power supply (UPS)
●
Terminal server installation
●
Call detail recording (CDR)
●
Reliable Data Transport Tool (RDTT) package
●
Printers
●
DS1/T1 CPE loopback jack
●
External modems
●
Busy tone disconnect equipment for non-U.S. installations
●
Music-on-hold
●
Paging and announcement equipment
●
Adjunct Information Sources
●
For these adjunct systems, consult the documentation specific to the system for complete
installation instructions.
Your planning documentation specifies the equipment you will be installing.
!
WARNING:
To reduce the risk of fire, use only 26 AWG or larger telecommunication line
WARNING:
cords when installing telephones or adjuncts.
on page 389
on page 399
on page 413
on page 418
on page 419
on page 434
on page 437
on page 383
on page 385
on page 387
on page 392
on page 397
on page 417
on page 441
on page 442
on page 358
on page 387
on page 436
Issue 9.1 June 2006
357