Connecting Telephones And Adjuncts - Avaya G700 Installation And Upgrades

• Avaya MM711 Analog: analog trunks use the 507B or 110-SCP-9 sneak current protectors. Over-
voltage protection is normally provided by the local telephone company. Analog voice terminals
use one of the following types of combined over-voltage and sneak current protection:
- Gas tube with heat coil: 4B1E-W
- Solid state with heat coil: 4C1S
- IROB: 146C (4-lines) or 146F (25-lines)
!
WARNING:
Only service-trained personnel are to install these circuit protection devices.

Connecting Telephones and Adjuncts

To administer dial plans and trunks and other features, you will use MultiVantage, as usual. Consult the
"Administrator's Guide for Avaya MultiVantage
Your planning documentation specifies the equipment you will be installing. To locate installation
instructions, use the documentation indicated below.
!
WARNING:
To reduce the risk of fire, use only 26 AWG or larger telecommunication line cords
when installing telephones or adjuncts.
!
WARNING:
Attention: Pour réduire les risques d'incendie, utiliser uniquement des conductors de
télécommmunications 26 AWG ou de section supérieure.
The S8300 Media Server with G700 Media Gateways supports the following terminals:
• IP terminals 4624, 4612, 4606
• IP Screen Phone 4630
• DCP 6402, DCP 6402D, DCP 6408D, DCP 6416D, DCP 6424D, DCP 8410D, DCP 8434DX
• XM24 expansion module for 6416 and 6424 telephone sets
• 100A Analog Module Interface (consult: http://support.avaya.com)
• Avaya Self-conscious (consult: http://support.avaya.com)
• IP Soft Phone
• Switched hub (consult: http://support.avaya.com)
• EC500 Extension to Cellular
• Transtalk 9000 Digital Wireless System
• Digital Enhanced Cordless Telecommunications
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002
TM
3 Avaya S8300 Media Server: Completing the Installation Process
Software, 555-233-506".
TM
67