Making Double-Sided Copies (1 2, 2 2); Using Radf - Konica Minolta 8050 Instruction Manual

Hide thumbs Also See for 8050:

Table of Contents

Making Double-Sided Copies (1 2, 2 2)

The Basic Screen is initially set to 1-1 copy mode to make single-sided copies from

single-sided originals.

Follow the procedure below to make double-sided copies from the originals scanned

from the document feeder or from the platen glass.

Select the copy mode according to the original type (single-sided or double-sided).

Specifications for Double-Sided Copying Using RADF

❒ See p. 12-9 for the information on unsuitable RADF originals.

❒ Incompatible Conditions: Face Up, Multi-Page Enlargement, Non-Image Area

Erase, Verti./Horiz. mode or Auto mode of Repeat, AUTO Layout, Storing

Image in Overlay Memory

Double-sided original

Touch 1 2 or 2 2 on the Basic Screen to highlight it.

When starting a new copying job, be sure to close the RADF securely, then

press [AUTO RESET].

Single-sided original