Making Multiple Page Signature Booklet (Booklet); Function Overview; To Copy Using Booklet - Konica Minolta bizhub 500 User Manual

5
5.9

Making Multiple Page Signature Booklet (Booklet)

Use this function to arrange the scanned original pages in booklet format in
correct order when folded in half.
If the machine is equipped with Finisher FS-510 and Saddle stitcher SD-502
options, the finished sets can be half-folded and also stapled in the center.

Function overview

With Booklet function specified, magnification will be set to ×0.647 automat-
ically. For example, the 8-1/2×11 original will be automatically finished into
8-1/2×11 spread (a booklet of size 5-1/2×8-1/2). If 11×17 spread (a booklet
of size 8-1/2×11) is desired, manually select the tray loaded with 11×17 copy
paper.
To use this function properly, the binding position of the finished set should
be specified.
Mode
Left Bind
Right Bind

To copy using Booklet

0 Load the original in the ADF. If the number of original sheets exceeds 80,
use Separate Scan mode. For details, see "Separate Scan Setting" on
page 3-58.
0 Original pages should be a multiple of 4 in 1%2 mode, or a multiple of 2
in 2%2 mode. Otherwise, blank pages are automatically inserted to the
last.
0 The original size is detected when loaded in the ADF, then the machine
automatically specifies the recommended magnification ratio of ×0.647
and an appropriate paper size with Auto Paper Select activated.
The machine can be set to change the recommended magnification ratio
manually. For details, see page 14-35.
0 The binding margin will be automatically specified.
5-54
Description
Select to make a left-side-bound booklet.
Select to make a right-side-bound booklet.
Application Functions
..............
..............
bizhub 500/420