Setting Fabric Timers; Setting Fabric Timers In System View; Setting Fabric Timers In Vsan View - HP FlexFabric 5700 Series Configuration Manual

Setting fabric timers

The fabric operation involves the following timers:
Distributed service timeout period.
•
Error detection timeout period.
•
Resource allocation timeout period.
•
For more information about these timers, see FC-related protocols and standards.
You can set fabric timers in one of the following views:
System view—The setting takes effect on all VSANs.
•
VSAN view—The setting takes effect only on the VSAN.
•
If you set a fabric timer in both system view and VSAN view, the setting in VSAN view applies to the
VSAN.

Setting fabric timers in system view

Step
1. Enter system view.
2. Set the global distributed
service timeout period.
3. Set the global error
detection timeout period.
4. Set the global resource
allocation timeout period.

Setting fabric timers in VSAN view

Step
1. Enter system view.
2. Enter VSAN view.
3. Set the distributed service
timeout period for the
VSAN.
4. Set the error detection
timeout period for the
VSAN.
5. Set the resource allocation
timeout period for the
VSAN.
Command
system-view
fc timer distributed-services value
fc timer error-detect value
fc timer resource-allocation value
Command
system-view
vsan vsan-id
timer distributed-services value
timer error-detect value
timer resource-allocation value
39
Remarks
N/A
The default setting is 5000
milliseconds.
The default setting is 2000
milliseconds.
The default setting is 10000
milliseconds.
Remarks
N/A
N/A
The default setting is 5000
milliseconds.
The default setting is 2000
milliseconds.
The default setting is 10000
milliseconds.