Placing Originals; Orientation Of Originals - Oce 3122 Manual

Placing Originals

There are three ways to place originals for copying. The method that you select will depend on the size
and type of the original that you are using, and the copy settings that you have programmed.
Platen glass
Use when copying books, originals on heavy paper, lightweight paper, and transparencies.
ADF (Automatic Document Feeder)
Place a stack of originals in the ADF, and they are automatically fed to the platen glass for copying.
NOTICE
Only one copy can be made when using the ADF.
RDF (Recirculating Document Feeder)
Place a stack of originals in the RDF, and they are automatically fed to the platen glass for copying.
Two-sided copies can also be automatically made from two-sided originals.

Orientation of Originals

You can place originals vertically or horizontally. Always align the top edge of your original with the
back edge of the platen.
NOTICE
If the original is not placed correctly, copies may not be made correctly depending on the copy mode.
MEMO
A4/A5-size originals can be placed vertically or horizontally. However, the copy speed for vertically placed
originals is somewhat faster than that for horizontally placed originals. (Horizontally placed A4/A5-size originals
are referred to as "A4R/A5R.")
A3-size originals must be placed horizontally.
[Platen glass]
[RDF]
2-12
Océ 3121 – Copying Manual – English
Vertical placement
Vertical placement
Horizontal placement
Horizontal placement