Making Two-Sided Copies From One-Sided Originals (1 2-Sided) - Oce 3122 Manual

Making Two-sided Copies from One-sided Originals
(1 2-SIDED)
MEMO
This feature can be used with the following combinations of models and options.
Original Placement
Series Name
Océ 3121
This feature enables you to make two-sided copies from one-sided originals.
Original
NOTICE
When copying onto A5R paper in the 1
Be certain to place the original horizontally when making copies from A4R, A5R and other horizontal sizes. If these
originals are placed vertically, the back of the copy will be printed upside down.
The number of copies that can be made in the 1
When placing an original on the platen glass:
· A3, A4R, A5R-size copy paper:
· A4, A5-size copy paper:
When placing originals in the ADF:
Only one copy can be made.
When placing originals in the RDF:
· A3, A4R, A5R-size copy paper:
· A4, A5-size copy paper:
MEMO
If two or more one-sided originals are placed in the RDF, the number of originals will automatically be counted
before copying begins. The Auto Count function prevents the first copied page from being reproduced blank.
You can also make copies with the Auto Count function cancelled. If you specify the number of originals with
[EVEN NUMBER] or [ODD NUMBER], automatic counting is not performed. Cancelling automatic counting saves
time, and also reduces wear and tear on originals.
If there are an odd number of originals, the back of the last page is left blank. (The machine's counter does not
count the blank page as a copy.)
Place your originals.
For instructions on how to place an original on the platen glass, see p. 2-13.
For instructions on how to place originals in the ADF, see p. 2-14.
For instructions on how to place originals in the RDF, see p. 2-16.
Océ 3121 – Copying Manual – English
Where to place the original
Platen glass ADF
Yes Yes
Copy
2-sided mode, only one copy can be set.
2-sided mode are as follows.
only one
20 sheets
50 sheets
100 sheets
1
RDF
2
Yes
3
4
5
6
7
8
9
10
3-35