Oce 3122 Manual page 153

About the Auto Count Function
When your machine is equipped with an RDF, you can set the Auto Count function so that originals
are counted automatically.
When making copies from originals placed in the RDF, copying is performed from the last page. If
the number of originals does not match the Image Combination mode, the first sheet may not be
copied correctly.
The Auto Count function automatically counts originals before copying is started to make sure that
the required number of originals are present to prevent the first sheet from being incorrectly copied.
MEMO
You can also specify the number of originals in advance without using the Auto Count function.
When copying three horizontally placed originals in the 2 ON 1 Image Combination mode
When copying three vertically placed originals in the 2 ON 1 Image Combination mode
Place your originals.
For instructions on how to place an original on the platen glass, see p. 2-13.
For instructions on how to place originals in the RDF, see p. 2-16.
1 Press the [IMAGE COMB.] key.
Océ 3121 – Copying Manual – English
With Auto Count selected With Auto Count not selected
With Auto Count selected With Auto Count not selected
1
2
3
4
5
6
7
8
9
10
4-35