Recalling A Copy Job - Oce 3122 Manual

Recalling a Copy Job

Place your originals.
For instructions on how to place an original on the platen glass, see p. 2-13.
For instructions on how to place originals in the ADF, see p. 2-14.
For instructions on how to place originals in the RDF, see p. 2-16.
1 Press the [MODE MEMORY] key.
2 Select the memory key where the desired copy
setting is stored.
3 Check the copy settings stored to the memory key. If
the contents are correct, press the [OK] key.
MEMO
Recalling a copy job from memory cancels the current copy job.
After recalling a copy job from memory, you can change the
settings stored to that copy job.
If you press another memory key, the copy job stored to that key
is recalled.
3 Press the [DONE] key.
The display returns to the Basic Features screen.
Proceed to make copies in the usual way.
(See chapter 2, "Basic Copying".)
MEMO
You can also cancel the mode by pressing the
6-10
Océ 3121 – Copying Manual – English
key. (The machine returns to the Standard mode.)