Oce 3122 Manual page 185

5 Press the [OK] key.
The message on the right appears asking if it is OK
to erase the copy job.
6 Select the [YES] key.
MEMO
If you press the [YES] key, the currently stored copy job and
name are erased.
If you want to erase only the name, see "Storing a Memory Key
Name," on p. 6-6.
The stored copy job is erased.
The message on the right appears for about two seconds.
Proceed to step 7.
If you want to cancel erasing
Select the [NO] key. The display returns to that in step
4.
7 Press the [OK] key.
8 Press the [DONE] key.
The display returns to the Basic Features screen.
Océ 3121 – Copying Manual – English
1
2
3
4
5
6
7
8
9
10
6-9