Clearing Designated Areas (Clear Area) - Oce 3122 Manual

Clearing Designated Areas (CLEAR AREA)

Clear designated areas as follows.
MEMO
You can cancel the mode by pressing the
1
Press the [AREA DESIG.] key.
MEMO
For details on operations to carry out from placing the original
until the Special Features screen is displayed, see "Calling up
the Special Features Screen," on p. 4-3.
2
Designate the area(s) to be cleared
To clear all already designated areas:
Press the [C] key. Proceed to step 5.
To clear a specific area:
Press the [CLEAR AREA] key.
3 Select the area to clear, press the [OK] key.
MEMO
Stored areas are indicated by solid lines
5-6
Océ 3121 – Copying Manual – English
key.