Special Features Screen - Oce 3122 Manual

Special Features Screen

When you press the [SPECIAL FEATURES] key in the Copy Basic Features screen, the Special
Features screen appears in the touch panel display. The Special Features screen displays special
feature modes. If you select a Special Feature mode, a more detailed screen for the selected mode
appears in the touch panel display. To close the Special Features screen and return to the Basic
Features screen, press the [DONE] key.
When the RDF is attached (1/2)
[TWO-PAGE SEPARATION]
Press to select or cancel the Two-page
Separation mode. This mode enables you to
copy bound originals such as books in one
(See "TWO-PAGE SEPARATION," on p. 4-4.)
[OVERLAY]
Press to select or cancel the Sheet
Overlay or Book Overlay modes.
This mode enables you to
superimpose two original images
onto a single copy sheet.
(See "OVERLAY," on p. 4-9.)
[AREA DESIG.]
Press to select or cancel the Area
Designation mode. This mode enables
you to image-process designated
areas. (See "AREA DESIG.," on
Press to select or cancel the Image Creation
mode. (See "IMAGE CREATION," on p. 5-8.)
1-4
Océ 3121 – Copying Manual – English
Press to set or cancel the Different Size Original mode. This mode enables you to feed
different-size originals together in one group in the RDF providing that the leading
Interleaving mode. This mode enables you to insert a
copy sheet between transparencies. You can also
make copies of the same original image on both the
step.
p. 5-3.)
[IMAGE CREATION]
mode enables you to make copies of original images
[DIF. SIZE ORIGINAL]
edge of each page is the same length.
(See "DIF. SIZE ORIGINAL," on p. 4-14.)
[TRANSP. INTERLVING]
Press to select or cancel the Transparency
transparencies and interleaf sheets.
(See "TRANSP. INTERLVING," on p. 4-6.)
Press to select or cancel the Sharpness mode. This
with the contrast reproduced more sharply.
(See "SHARPNESS," on p. 5-17.)
[SHARPNESS]