Oce 3122 Manual page 141

3 Select the screen for setting the margin.
4 Set the margin width (1 to 20 mm), then press the
[OK] key.
Use the Number keys or the [–] [+] keys to set the
width of the margin.
· Press the [+] key to increase the size of the
margin.
· Press the [–] key to decrease the size of the
margin.
NOTICE
If you are using the Margin and Two-sided modes together and
copying an original that already has a margin, follow the
instructions below:
· 1
2 sided: Set the margin for the back only.
· 2 2 sided: You do not need to set the margin. Proceed to make copies in the usual way.
· 2 1 sided: Set the margin for the back only.
If you are using the Margin and Two-sided modes together and copying an original that does not have a
margin, follow the instructions below:
· 1 2 sided: Set the margin for both the front and back.
· 2 2 sided: Set the margin for both the front and back.
· 2 1 sided: Set the margin for both the front and back.
5 Press the [DONE] key.
The display returns to the Basic Features screen.
Proceed to make copies in the usual way.
(See chapter 2, "Basic Copying".)
MEMO
You can cancel the settings, press the [SPECIAL FEATURES], [MARGIN], and [C] keys in that order.
You can also cancel the mode by pressing the
Océ 3121 – Copying Manual – English
key. (The machine returns to the Standard mode.)
1
2
3
4
5
6
7
8
9
10
4-23