Oce 3122 Manual page 169

4 Designate the area.
Press the [X1], [X2], [Y1] and [Y2] keys, and enter
each of the values using the Number keys. (For
details, see "How to Designate Areas for Image
processing," on p. 5-4.)
MEMO
If you make a mistake when entering values, press the
and enter the values again.
5 Press the [OK] key.
To cancel area designation, press the [C] key. You
return to step 3.
6 Set the number of times to carry out image
processing, and press the [OK] key. You can set 2 to
20 times as the number of repeats.
Automatic setting:
Press the [AUTO] key.
MEMO
To make repeated copies with the number of repeats
automatically set, select the copy paper size. The original image
is then copied so that the maximum possible number of copies fit
in the selected copy paper size.
Manual setting:
Press the [+] or [–] key. You can also set the number of
repeats by the Number keys.
MEMO
Sometimes the designated image will be clipped depending on
how many times you have manually set it to be repeated.
7 Press the [DONE] key.
MEMO
You can also make copies by pressing the
screen on the right displayed.
Océ 3121 – Copying Manual – English
key,
key with the
1
2
3
4
5
6
7
8
9
10
5-11