Oce 3122 Manual page 163

3 Select the image process ([FRAMING], [BLANKING],
or [NEGA/POSI]) to be applied to the designated
area, then press the [OK] key.
MEMO
To continue designating areas to be image processed in the
same way, press the [AREA2] key. Then, repeat the procedure
from step 2.
Designated areas can be cleared by pressing the [CLEAR
AREA] key. Repeat the procedure from step 2.
4 Select whether or not to continue Area Designation.
To continue Area Designation:
Press the [NEXT] key. Repeat the procedure from
step 2.
To quit Area Designation:
Press the [DONE] key. Proceed to step 5.
5 Press the [DONE] key.
The display returns to the Basic Features screen.
MEMO
For details on how to clear designated areas, see p. 5-6.
Proceed to make copies in the usual way.
(See chapter 2, "Basic Copying".)
MEMO
You can cancel the mode by pressing the
Océ 3121 – Copying Manual – English
key. (The machine returns to the Standard mode.)
1
2
3
4
5
6
7
8
9
10
5-5