Automatically Setting The Copy Ratio Based On The Original And Copy Paper Sizes (Auto Zoom) - Oce 3122 Manual

Proceed to make copies in the usual way.
(See chapter 2, "Basic Copying".)
NOTICE
When the selected copy ratio is outside of the 50 to 200% range, copies cannot be made from originals placed
on the ADF.
MEMO
If you press the [1:1] key, the setting is cancelled, and the copy ratio returns to direct copying (100%).
You can also cancel the mode by pressing the
Automatically Setting the Copy Ratio Based on the Original and Copy
Paper Sizes
(AUTO ZOOM)
In this mode, the machine automatically selects the appropriate copy ratio based on the size of the
originals and the selected copy paper. The copy ratios are as follows:
When placing originals in the RDF or on the platen glass:
When placing originals in the ADF:
Original
NOTICE
You cannot use the Auto Zoom mode with Auto Paper Selection.
You cannot copy highly transparent originals, such as transparencies, in the Auto Zoom mode. Use the Reduction,
Enlargement or Zoom modes.
To use the Auto Zoom mode, your originals must conform to a standard paper size.
When the copy ratio is outside the 50 to 200% range in the Auto Zoom mode, copies cannot be made from
originals placed on the ADF.
MEMO
If an error occurs between the Auto Zoom copy ratio and the actual copy size, you can adjust this with the Zoom
Fine Adjustment function. (See "Zoom Fine Adjustment," on p. 3-38 in the Reference Manual .)
The copy paper placed in the stack bypass normally is not processed in the Auto Zoom mode. To process this
paper in the Auto Zoom mode, you must first specify the size of the copy paper to be placed in the stack bypass.
(See "Selecting the Copy Paper Size," on p. 3-2.)
The paper sizes that can be used with Auto Zoom are as follows:
For an original placed on the platen glass
For originals placed in the ADF
For originals placed in the RDF
Place your originals.
For instructions on how to place an original on the platen glass, see p. 2-13.
For instructions on how to place originals in the ADF, see p. 2-14.
For instructions on how to place originals in the RDF, see p. 2-16.
3-16
Océ 3121 – Copying Manual – English
key. (The machine returns to the Standard mode.)
25 to 800%
50 to 200%
: A3, A4, A4R, A5
: A3, A4, A4R, A5, A5R
: A3, A4, A4R, A5
Copy