Oce 3122 Manual page 125

Place your originals.
For instructions on how to place an original on the platen glass, see p. 2-13.
For instructions on how to place originals in the RDF, see p. 2-16.
1 Press the [TRANSP. INTERLVING] key.
2 Place the transparencies in the stack bypass.
NOTICE
Adjust the slide guides in the stack bypass to fit the size of the
transparencies.
MEMO
You can place a stack of transparencies of up to 5 mm high in
the stack bypass.
3
Select the size of the transparencies, then press the
[OK] key.
NOTICE
In the Transparency Interleaving mode, the transparencies are
fed from the stack bypass and the copy paper is fed from the
paper drawer.
If a message like the one on the right appears in the touch panel
display, adjust the slide guides and select the size of the
transparencies again.
Océ 3121 – Copying Manual – English
1
2
3
4
5
6
7
8
9
10
4-7