Oce 3122 Manual page 79

4 Place the copy paper in the stack bypass.
Align the required number of sheets of copy paper
with the slide guides. The surface that you want to
copy on must be placed face up. Insert the copy
paper into the machine until it stops.
The Stack Bypass Size Entry screen is displayed.
MEMO
When [STACK BYPASS SIZE ENTRY] in the custom settings is
set to [ON] (See p. 3-15 in the Reference Manual .), the screen
on the right appears. Initial setting is [OFF].
5 Select the copy size, then press the [OK] key.
Select one of the [A/B SIZE], [INCH-SIZE], [FREE
SIZE] or [ENV.] (COM10, Monarch, DL, ISO-B5,
ISO-C5, YOUKEI 4) keys.
NOTICE
When placing envelopes on the stack bypass, be sure to press
the [ENV.] key and specify which standard of envelope is placed.
Incorrectly specifying the envelope standard may cause a paper
jam.
MEMO
If one of the Two-sided, Overlay, or Image Combination modes
has been set, select the size of the copy papers placed in the
stack bypass from among the copy sizes displayed in the touch
panel display.
Proceed to make copies in the usual way.
(See chapter 2, "Basic Copying".)
Océ 3121 – Copying Manual – English
1
2
3
4
5
6
7
8
9
10
3-7