Oce 3122 Manual page 90

4 Select the [AUTO] key, then Press the [DONE] key.
The display returns to the Basic Features screen.
If you placed your original on the platen glass:
When you have lowered the platen cover (or ADF or
RDF), the selected copy ratio appears in the touch
panel display.
If you placed your original in the ADF:
After you have placed the originals, the selected copy
ratio appears in the touch panel display.
If you placed your original in the RDF:
After you press the
selected copy ratio appears in the touch panel display.
MEMO
The copy ratio is set within the range of 25 to 800%.
Proceed to make copies in the usual way.
(See chapter 2, "Basic Copying".)
NOTICE
When the copy ratio is outside the 50 to 200% range in the Auto Zoom mode, copies cannot be made from
originals placed on the ADF.
MEMO
If you press the [1:1] key, the setting is cancelled, and the copy ratio returns to direct copying (100%).
You can also cancel the mode by pressing the
3-18
Océ 3121 – Copying Manual – English
key to begin copying, the
key. (The machine returns to the Standard mode.)